Model Number

DIM Series

DIM plug-in electromagnetic flow meter is used to measure conductive liquid which is particularly applicable to large-diameter pipeline measurement, and is widely used in petroleum, chemical, metallurgical, power, paper, food, water treatment and other industries

Model	DIM Series
caliber	DN350 - DN2000
Accuracy	± 1.5% of measured values (standard) ± 1.0% of measured values (special) ± 0.5% of measured values (high precision)
The minimum conductivity :	5μs/cm
Measuring range	Recommend use of: 0.5m / s ~ 10m / s continuous adjustable The greatest use of: 0.2 m / s ~ 15m / s continuous adjustable
Medium temperature	-20- +150℃
Environmental temperature	-20- +60℃
Fluid pressure	≤ 1.6MPa
Grading Protection	Sensor Converters IP67 IP67 IP68 IP67
Material	probe materials: 304 stainless steel, electrode materials : 316 stainless steel, insulation layer : PTFE
Electrical Interface	M20×1.5,1/2〞NPT
shows	Standard dual LCD can also showed that the instantaneous and cumulative flow
Power	220VAC 50HZ 24VDC
Explosion-proof grade	Exd[ia]iam ll CT5
Signal output	1, volume can be set to switch: pulse output (maximum 1000 HZ); High / low flow alarm; ATC alarm; Signal flow direction; Fault Alarm; 2, current output :4-20 mA output
Configuration mode	1, through three key scene manual configuration. 2, the scene through remote configuration. 3, a parade through hands-site configuration. Memory: The EEPROM memory will not disappear without batteries preservation.